RND

The use of holsters in emergency medical services has become established across the board. In an emergency, holsters allow quick and direct access to essential equipment.
However, wearing holsters on a standard trouser belt often proves uncomfortable and annoying, especially during standby periods. When sitting or lying down, the equipment carried in the holster can dig in.

The QUICK EMS duty belt provides the solution:
The two-part design with inner and outer belt allows the holster to be removed during standby, while still enabling it to be put on again in seconds when an alarm is raised.
The inner belt is worn on the duty trousers like a normal trouser belt. The outer belt is worn over it and can be put on and taken off within seconds thanks to the integrated 50 mm high hook-and-loop fastening system. For optimum support, the outer belt is closed with an easy-to-use side-release buckle. The buckle is protected against accidental opening by a safety mechanism.

The clever zip compartment in the inner belt makes it possible, when required, to carry coins or banknotes securely to prevent loss or theft.

Included in delivery are four retaining loops, one of which is equipped with an additional plastic eyelet, for example for attaching a key ring. These retaining loops prevent holsters from slipping on the duty belt.
The highlight is an additional loop with the unique GLOVE-FIX system from TEE-UU for infection protection gloves. The gloves are simply folded and secured with hook-and-loop tape. This ensures secure storage while still allowing lightning-fast access to the gloves.

Thanks to five different lengths from S to XXL, the belt can be optimally adapted to individual needs without any problem.

Hip circumference:
- S: 70 - 90 cm
- M: 85 - 105 cm
- L: 100 - 120 cm
- XL: 115 - 135 cm
- XXL: 130 - 150 cm

Our tip: it’s better to order a little too large than too small!

Features:
Outer belt with hook hook-and-loop tape
Inner belt with zip compartment and loop (soft) hook-and-loop
4 belt keepers and 1 GLOVE-FIX
Belt buckle with safety mechanism
Outer and inner belt individually adjustable in length
All-round reflective strip on the outer belt

Product data:

Colour: black/silver reflective
Weight: approx. 270 g
Lengths: S, M, L, XL, XXL
Material: polypropylene

Multicut scissors made from stainless steel for all-round use.

Ropes, straps, belts, wires, cables etc. can be cut effortlessly with one hand.
Thanks to the side locking catch, the utility scissors can be kept permanently closed.
The scissors can be securely attached via an eyelet with ring, e.g. to the retaining cords of TEE-UU holsters, to prevent loss.

Suitable for MICRO, PROFI, MASTER and MASK holsters.

Features:
Stainless steel blade
Key ring
Metal locking catch
Spring-assisted opening of the scissors

Product data:

Colour: yellow handle
Weight: approx. 105 g
Dimensions (W x H x D): 19 x 5 x 1.5 cm
Material: stainless steel blade

Hook-and-loop straps, for example for attaching holsters to shoulder carrying straps, e.g. on respiratory protective equipment, backpacks, climbing harnesses, etc.

Features:
durable hook-and-loop surfaces

Product data:

Colour: black
Weight: approx. 8 g
Dimensions: 2.5 x 22.5 cm
Material: polypropylene

Modern command tools such as tablet PCs are increasingly being used in day-to-day operations. However, storage is often still a challenge.

The TABLET-FLAP enables protected storage and quick removal of a tablet PC, for example in the BIG Einsatz-Organizer.
With the TABLET-FLAP, classic operational equipment and modern IT become a single unit.

The TABLET-FLAP’s size can be adjusted variably via a hook-and-loop system on the back, meaning all standard devices up to a size of 28 x 19 cm fit inside.
Thanks to the sensitive and hard-wearing PVC protective film, the touchscreen remains fully usable even when the tablet is inside the TABLET-FLAP. The PVC protective film helps prevent possible damage to or soiling of the device.

Features:

2-hole punching with metal eyelets for filing
Hook-and-loop tabs on three sides for size adjustment
Plastic plate for high stability

Product data:

Colour: grey
Weight: approx. 130 g
Dimensions (W x H x D): 23.5 x 29 x 1 cm
Material: 600D polyester

For training in person search and rescue with the help of a thermal imaging camera.
The THERMO-PADs are designed for use together with the CRASH & CARRY or CRASH JUNIOR training dummy. Attaching and activating the pads is child’s play.

Preparation and activation:
The self-adhesive THERMO-PADs can be attached to the training dummy in just a few seconds. A THERMO-PAD is activated automatically by opening the vacuum packaging. The THERMO-PAD reacts with oxygen in the air and, after an activation time of approx. 20 minutes, develops thermal radiation that is clearly visible with a thermal imaging camera. The THERMO-PAD heats up to a temperature of approx. 50°C.

Operating time and disposal:
At an air temperature of 20°C, an operating time of at least 4 hours is achieved.
After single use, the THERMO-PAD can be disposed of with household waste.

Product data:

Colour: white
Weight: approx. 48 g, per piece
Dimensions (W x H x D): 13 x 9.5 x 1 cm, per piece
Packaging unit: 10 pieces

Logbook folder with ring binder mechanism in portrait format for documents up to DIN A5.
Thanks to a large number of compartments, the tidy storage of all documents is ensured.

The TRIP Organizer is securely closed with a zip.

2 transparent pockets e.g. for the logbook and the registration certificate
Ring binder mechanism for sheets up to DIN A5 in portrait format
5 compartments e.g. for documents and credit cards
1 mesh pocket with hook-and-loop fastener e.g. for small items
3 pen holders
2 removable key holders
external transparent pocket for labelling
wrap-around zip

Product data:

Colour: black
Weight: approx. 480 g
Dimensions (W x H x D): 20 x 28 x 4 cm
Material: 600D polyester

The smart solution for carrying a torch and a multitool or rescue knife in one holster!

The TWIN Holster is a successful combination of the proven TOOL and LED holsters – in both capacity and functionality!
The holster’s two device compartments can be opened individually and adjusted individually to the size of the contents.
The compartments feature the plastic ring on the compartment bases known from the TEE-UU baton torch holsters, to protect against accidental switching on of TEE-LIGHT torches.
Side double elastic straps provide space for spare batteries as well as pens up to a maximum length of 13 cm.

For operational areas where neutral equipment without a logo or coloured panels is required, the TEE-UU logo with hook-and-loop backing can simply be removed.

The holster can be attached horizontally or vertically to a duty belt or belt using the tear-resistant Hyperlon belt loop.

Features:
2 same-sized main compartments, separate opening
2 elastic loops
Hyperlon belt loop
Removable TEE-UU logo

Product data:

Colour: black
Weight: approx. 95 g
Dimensions: 10.5 x 14 x 4 cm
Material: 1200D polyester

Spacious holster with lockable compartments for carrying extensive equipment on duty and space for personal valuables.

The two large, padded main compartments provide ample space, even for larger items of equipment. The compartments are distinguished by two differently coloured zip fasteners and can be closed securely. For better overview and organisation, the compartments are fitted inside with an additional mesh pocket and a slip-in pocket respectively. For carrying e.g. clothing scissors, the rear compartment is additionally reinforced at the bottom to protect against puncture.
The large zipper pulls allow the compartments to be opened quickly.
On the front, the ZIP holster is equipped with two slip-in pockets for e.g. a pen torch and a pen.

In the size-adjustable, padded smartphone compartment (to protect the display), devices up to 7.5 x 16 cm (approx. 6.2” screen diagonal, depending on design) can be accommodated. For quick access to the securely stored device, the compartment has a flap with a plug-in buckle made of durable plastic.

In addition, the holster is equipped with the unique GLOVE-FIX system for quick access to protective gloves.

With the belt loop on the back, the ZIP holster can be worn either horizontally or vertically on a belt or on TEE-UU duty belts.

Features:
Front main compartment (11.5 x 17 x 2 cm):
- Zip fastener, fluorescent yellow with large zipper pull
- internal mesh pocket
- padding
Rear main compartment (11.5 x 17 x 2 cm):
- Zip fastener, black with large zipper pull
- internal slip-in pocket
- reinforced base to protect against puncture
- padding
2 pen pockets for pens or pen torch, front
Size-adjustable, padded smartphone compartment, front
GLOVE-FIX system for protective gloves, front top
Belt loop for vertical or horizontal carrying of the holster

Product data:

Colour: black
Weight: approx. 135 g
Dimensions: 12.5 x 18 x 7 cm
Material: 1200D polyester