Skip to Content
  1. Products
  2. Practice Equipment
  3. Dispenser Systems

Dispenser Systems

Dispenser systems carry a significant facilitation of the daily practice routine. This is because during treatment it may be necessary to have a spittoon bag or swab ready for use at the flick of a wrist. In addition to facilitating treatment procedures, dispenser systems also offer space-saving and hygienic storage of the various consumables. Discover the variety of different dispenser systems in our online store and set up your treatment rooms in a time-saving and efficient way. At the same time, the plastic and stainless steel housings of our dispensers are extremely easy to clean and ensure dust-free coverage of the consumables. In addition, the design of all models provides a direct overview of the current fill level.
Basis Preisliste Netto
Sort By: Featured
MEGRO Glove box holder ratiomed, made of plexiglass/acrylic, transparent
For handy storage of gloves, supplied including fixing material.
Size/Length/Dimensions: 25 x 13 x 7.5 cm
Material: Plexiglass/acrylic
Colour: transparent
()
From 12.48 € 0.0 EUR
HAEBERLE Needle dispenser PicBox 5-compartment
Cannula dispenser PicBox 5-compartment wall model with first-in/first-out guarantee and dust protection to DIN 58953, including 5 small bins.

Product data:

Dimensions: W x D x H: 600 x 135 x 165 mm
Colour: grey-white
Material: plastic
()
117.33 € 117.33 EUR
HAEBERLE Syringe dispenser PicBox 3-compartment wall model
Syringe dispenser PicBox 3-compartment wall model with First-in/First-out guarantee and dust protection in accordance with DIN 58953, with 3 large bins.

Product data:

Dimensions: W x D x H: 600 x 200 x 245 mm
Colour: grey-white
Material: plastic
()
178.43 € 178.43 EUR
MEDDAX Glove holder Acrylic Solo 246 x 133 x 73 mm
Our Solo glove holder is made of transparent, impact-resistant XT acrylic glass, 3 mm thick. It is supplied including mounting material (2 screws + 2 wall plugs).

Product data:

Material: XT acrylic glass
Dimensions: 246 x 133 x 73 mm
Thickness: 3 mm
Colour: transparent
()
14.85 € 14.85 EUR
MEDDAX Stainless steel glove holder Trio Plus 238 x 520 x 93 mm
The MEDDAX Trio Plus glove dispenser for wall mounting is made of stainless steel and holds 3 boxes of disposable gloves plus 1 additional slot for the glove size you use most often. Thanks to the size labelling, the glove dispenser provides a quick overview. Supplied including mounting materials.

Product data:

Material: stainless steel
Dimensions (W x H x D): 238 x 520 x 93 mm
Colour: silver
Size indications: S, M & L
()
28.71 € 28.71 EUR
MEDDAX Syringe and cannula dispenser 4-fold beige
Made of impact-resistant polystyrene, resistant to most acids and oils - easy to clean - temperature resistance (-20 to +80 °C) - the bins are pivoting and removable - the housings have matching openings on the right and left for hanging and are stackable - supplied incl. labelling labels
External dimensions (W x D x H): 60 x 13.7 x 20.7 cm
()
49.39 € 49.39 EUR
MEDDAX Syringe and cannula dispenser 5-fold beige
5-compartment syringe and cannula dispenser, white
- made of impact-resistant polystyrene, resistant to most acids and oils - easy to wipe clean - temperature resistance (-20 to +80 °C) - the dispensing bins are swivelling and removable - the housings have suitable openings on the right and left for hanging and are stackable - supplied incl. labelling stickers - external dimensions (W x D x H): 60.1 x 11 x 16 cm
()
40.34 € 40.34 EUR
MEDDAX Universal container Syringe and cannula dispenser 3 compartments
• Made from durable plastic
• Housing in beige or white
• Transparent boxes
• Swivelling, stackable
• Free-standing / wall mount
• Individually packed in a carton.

Product data:

Size: large
Dimensions: 600 x 160 x 240 mm (W x D x H)
Material: polystyrene
Temperature resistance: -20 to +80 °C
()
64.93 € 64.93 EUR
SALVEQUICK Plaster dispenser incl. filling
Practical plaster dispenser pre-filled with 2 plaster refills.

The plasters are ready to use immediately when dispensed, as one of the two protective liners is removed automatically – this is very practical and saves time.

The plasters are protected from dust, and the complete plaster refill can only be removed with a special key.


Product data:

Dimensions: 23 x 5 x 11 cm
Filled with: 45x plaster strips, waterproof + 40x plaster strips, elastic
()
23.42 € 23.42 EUR
WAGNER Injection material dispenser
Injection supplies dispenser
Injection supplies neatly and clearly organised in two tilt bins with 3 and 6 compartments for syringes and needles. Space for swabs and disinfectant, with pull-out tray base, dimensions (H x W x D): 50 x 50 x 23 cm.
()
From 436.74 € 0.0 EUR
AMPRI Glove box holder wire white
Colour: white
Size/Length/Dimensions: approx. 26 x 9.5 cm
Material: wire
()
From 5.18 € 0.0 EUR
AMPRI Glove holder stainless steel Size M
Our glove holder is made of stainless steel. It is supplied including fixing material (2 screws + 2 wall plugs). One side has a brushed finish with protective film.

Product data:

Material: Stainless steel
Dimensions: approx. 246 x 133 x 73 mm
Sheet thickness: 1 mm
Colour: Stainless steel (silver)
()
22.21 € 22.21 EUR
AMPRI Glove holder Trio stainless steel
The Trio glove dispenser is made of stainless steel. It is supplied including mounting materials. For better overview, the sizes S, M, L are embossed on the side. It holds up to 3 boxes.

Product data:

Material: stainless steel
Dimensions: 258 x 392 x 96 mm
Colour: silver
()
44.57 € 44.57 EUR
CEDERROTH First Aid Board - Mini
The Mini first aid board only has space for plasters and a blood stopper. Ideal where space is limited or for work vehicles such as lorries or delivery vans. Dimensions (W x H x D): 25 x 40 x 5 cm.

Contents:
1 x Salvequick® plaster dispenser with 40 textile plasters and 45 plastic plasters
1 x Cederroth 4-in-1 blood stopper
3 x Cederroth 4-in-1 mini blood stoppers
()
51.60 € 51.6 EUR
CEDERROTH First Aid Cabinet - Mini
The First Aid Cabinet Mini is a small metal cabinet with the small Cederroth First Aid panel on the door. Storage for refill items in the lockable cabinet. The first aid cabinet is specially designed for workplaces in demanding environments with high levels of dirt and dust as well as moisture. Dimensions (W x H x D): 26 x 44 x 17 cm.

Contents:
1 x Salvequick® plaster dispenser with 40 textile plasters and 45 plastic plasters
2 x Cederroth 4-in-1 Blood Stopper
4 x Cederroth 4-in-1 Mini Blood Stopper
1 x Cederroth Protective Pack
6 x 40 Salvequick® textile plasters
6 x 45 Salvequick® plastic plasters
1 x scissors
1 x tweezers
2 x keys
()
209.08 € 209.08 EUR
HAEBERLE Dressing material dispenser COMPACT white
Dressing materials dispenser COMPACT, white
Plastic-laminated housing, dustproof cover with Plexiglas panels, incl. wall mounting rails and installation materials. Optimal compartment layout for all common tubular bandages, gauze bandages, plasters, etc. With 2 stainless magnetic holders for scissors, etc. Dimensions: W x D x H: 600 x 220 x 450 mm
()
654.50 € 654.5 EUR
HAEBERLE Injection set PicBox multi
PicBox multi injection set with First-in/First-out guarantee and dust protection in accordance with DIN 58953, elegant white housing, high-quality plastic-laminated finish, consisting of a syringe dispenser with 3 compartments, a needle dispenser with 5 compartments incl. wall mounting rail for easy installation.

Product data:

Dimensions: W x D x H: 630 x 180 x 435 mm
()
528.36 € 528.36 EUR
HAEBERLE Injection set PicBox without combination set (First-in/First-out)
The dispenser with first-in/first-out guarantee and dust protection in accordance with DIN 58953. The bins are filled from the top and the material is removed from the bottom. This ensures that items filled first are also removed first. Grey-white plastic housing with crystal-clear bins. Each bin with dust protection lid. Consisting of syringe dispenser with 3 bins, cannula dispenser with 5 bins. Dimensions W x D x H: 600 x 200 x 410 mm
()
309.95 € 309.95 EUR