Human Models

This life-size model clearly shows the segmented anatomy of the left and right lung. The different lobes are painted in different colours to highlight their position.

This model of two lumbar vertebrae in a schematic representation is approximately enlarged 2x and gives the therapist the opportunity to clearly simulate a herniated disc. By compressing the vertebral bodies, the inner nucleus of the intervertebral disc is forced out, vividly illustrating the mechanics of a herniated disc. The protruding prolapse can be pressed out in such a way that the effect on the spinal nerve is clearly visible. With this aid, you can quickly and easily explain to your patients what happens in the event of a herniated disc. Thanks to the enlarged representation, the model is very easy to handle and is also ideally suited for use in groups.

Diseases of the bladder and prostate
This life-size model is sectioned from the front and shows 5 different pathologies in their typical positions in the male bladder: cystitis, bladder stones, benign prostatic hyperplasia (BPH), diverticulum as well as a bladder tumour in three stages. On a stand.

Product details:

Size: 12 x 10 x 15 cm
Weight: 0.2 kg

Diseases of the Oesophagus
This life-size model shows a frontal section of the lower part of the oesophagus and the upper part of the stomach.

Common diseases of the oesophagus are illustrated:
- Hiatal hernia
- Ulcer
- Reflux oesophagitis
- Barrett’s ulcer
- Oesophageal varices
- Oesophageal carcinoma

On base.

This DIY kit contains all the components required to build a right-handed double-helix DNA (B-DNA) with 12 base pairs (including stand). The parts are colour-coded and have characteristic shapes: deoxyribose is pentagonal, phosphates are cylindrical, and the nitrogenous bases show their typical pyrimidine or purine structure. Two different central connector pieces represent the 2 and 3 hydrogen bonds between thymine/adenine and cytosine/guanine. The assembled model is important for illustrating the special features of double-stranded DNA structure and topology.

This life-size torso with open back consists of 28 parts and offers an exceptionally realistic representation of anatomical structures down to the finest details.
All body systems are shown with full accessibility. On the left side, all major superficial and deep muscles with vessels and bones can be seen. The open back shows the muscle layers as well as the spine and the associated nerve branches. A thoracic vertebra, including a section of the spinal cord, is removable to examine its anatomical details closely. The head is opened and one half of the brain is fully exposed. The neck is opened to reveal muscular, nervous, vascular and glandular structures. Significant features are numbered and indicated on the enclosed key card. The detachable male and female urogenital systems are interchangeable.

The removable structures include the following:
- Eye with optic nerve and extraocular muscles
- Half brain, divided along the longitudinal fissure, showing internal structures and blood vessels
- Trachea
- descending thoracic aorta and oesophagus
- right and left lung (2 parts each), showing the bronchial tree and vascular system
- thoracic cover
- mammary gland
- liver with gallbladder
- one kidney half in frontal section showing internal structure and vessels
- 2-part heart with clear depiction of atria, ventricles, valves and a section through the heart wall
- stomach in 2 parts
- pancreas, duodenum and spleen with vessels and ducts
- small and large intestine with removable cover over part of the caecum
- male urogenital systems (4 parts)
- female urogenital system (3 parts), including embryo
- thoracic vertebra (T12) with spinal cord

This bisexual model of the urinary system provides a comprehensive overview of the urinary system and shows the structures of the retroperitoneal cavity, the greater and lesser pelvis with bones and muscles, the inferior vena cava, the aorta with its branches including the iliac vessels, the upper urinary tract, the rectum, and the kidney with the adrenal gland. The front half of a kidney can be removed for detailed examination. With interchangeable male (bladder and prostate) and female (bladder, uterus and ovaries) inserts. The model is mounted on a base, making it easy to view and study.

Ear Model, 3x life-size, 4 parts - EZ Augmented Anatomy
This model shows the outer ear, middle ear and inner ear at three times life size. The eardrum with malleus, incus and stapes can be removed. The cochlea, labyrinth, vestibular and cochlear nerves are removable; one half of the cochlea can be detached. On base.

Product details:

Size: 36 x 16 x 20 cm
Weight: approx. 1 kg

ECMO Trainer Professional MK2
Simulator for practising extracorporeal membrane oxygenation (ECMO). The training model features a venous and an arterial circuit, both supplied with adjustable circulation pumps that can be set to pulsatile operation when required. The flow rate and pulse speed of the circuits are continuously adjustable, allowing simulation of a patient with all conditions that may occur during the procedure. VA and VV ECMO can be simulated. Puncture and cannulation can be performed using real materials. The arteries have a lumen of 8 mm and the veins 10 mm. This ensures trouble-free operation with all common catheter types. The puncture pads (one pad each on the right and left for femoral puncture and one for jugular puncture) are made of ultrasound-compatible material. This allows ultrasound monitoring of the puncture right down to the vessel tubing. Operation with a real ECMO device is fully possible; the trainer provides sufficient volume for real-life operation. The trainer has contact points for 4-channel ECG recording, to which an ECG simulator can be connected (not included). Connections for volume measurement at the veins are also provided. As the cannulas are usually very large and leave noticeable puncture holes, the simulator features a simple and effective tubing management system which allows the used section of tubing to be replaced from the tubing reservoir within seconds, so that no valuable training time is lost changing the tubing.
The tubing reservoirs are invisibly integrated into the model base; the base with training torso also serves as the bottom part of the transport case with trolley wheels. The water reservoir and pump system are separate and can be easily connected to the model via hoses with quick couplings.
With enlarged femoral puncture pads.

Oedematous foot with deep tissue necrosis
This foot is supplied with five oedema inserts, which respond differently to pressure depending on the severity level. In addition, the model shows deep tissue necrosis on the heel. The foot can be easily attached to the leg of the KERi/GERi nursing manikin and thus integrated into training.

Natural cast of a human elbow joint. Upper arm stump, ulna and radius. The ligament apparatus and the interosseous membrane are made of elastic material. The model allows demonstration of movements in the elbow joint such as flexion and extension, as well as the rotational movement of the forearm bones during pronation and supination. With removable stand.

The model, enlarged 6 times, can be opened in the horizontal plane to view the internal structures. The cornea, iris, lens and vitreous body can be removed. The muscle insertions on the sclera and part of the choroid are also shown. With stand

Product data:

Eye diameter: 15 cm
Weight: approx. 0.6 kg

Eye with orbit and eyelid
This 13-part model, approx. 2.5x magnification, shows the anatomy of the human eye. The orbit can be dismantled into three parts and then shows the following internal structures:
- Eyelid with lacrimal gland and nasolacrimal duct
- Muscles (4 parts)
- Eyeball, separable into two parts
- Cornea, iris, lens and vitreous body (3 parts)
On base.

Product details:

Size: 25 x 18 x 18.5 cm
Weight: 2.2 kg

FAST ultrasound training model
This training model was developed to practise the FAST (Focused Assessment with Sonography for Trauma) examination. This examination is used to detect free fluid in the intraperitoneal cavity or pericardium. The training options include the following examinations:

FAST procedures:
Internal bleeding in the area of the liver, kidney, pelvis and pericardium

Sonography of emergency patients:
Internal bleeding in the area of the pericardium, pleural cavity, liver, spleen and bladder; pathologies such as cholecystitis, an aortic aneurysm and an intestinal injury.

The illustrations show the following ultrasound images:
1. Cardiac tamponade
2. Bleeding in the right upper abdomen
3. Bleeding in the left upper abdomen
4. Bleeding in the pelvis
5. Pleural effusion
6. Perihepatic bleeding
7. Aortic aneurysm

The model is supplied with a carry case and an instructional DVD.

Product details:

Size: 61 x 30 x 30 cm
Weight: approx. 31 kg

Natural cast of the pelvis of an adult female. Iliac blades, sacrum and flexibly mounted L5 and L4. The sacrum is removable, and movements in the sacroiliac joint can be demonstrated.

As model 4058, but mounted on rubber and fully movable.

This spine model is an advanced teaching aid developed for medical training and patient education. It is designed to help users gain a deeper understanding of the structure and function of the human spine.

The spine model is divided into five different sections, each distinguished by different colours, including 7 cervical vertebrae, 12 thoracic vertebrae, 5 lumbar vertebrae, the sacrum and the coccyx. This colour differentiation helps to quickly and accurately locate and explain the key parts of the human spine during lessons, making learning easier.

The model also includes simulations of an L3–L4 herniated disc, the exit points of the spinal nerves and the vertebral artery of the cervical spine, enabling a deeper understanding of spine-related diseases and problems.

To improve the model’s practical usability, we have added a male pelvis and movable femoral heads. This provides a comprehensive representation of various aspects of the human skeletal system and enhances learning outcomes.

Our spine model for teaching is made from high-quality PVC plastic, ensuring durability and resistance to damage. The texture is clear and the dimensional accuracy is high, ensuring precise anatomical structures.

A fully flexible, life-size spine with occipital bone, cervical, thoracic and lumbar vertebrae, sacrum, coccyx and complete pelvis.
Also included are the spinal arteries, spinal nerves and a herniated disc at L3–L4. The different segments of the spine are colour-coded for easier identification.

Flexible life-size spine. It consists of the occipital bone (os occipitale), cervical, thoracic and lumbar vertebrae, sacrum (os sacrum), coccyx (os coccygis), complete pelvis with pubic symphysis and removable femoral heads. Also shown are the vertebral arteries, the branches of the spinal nerves and an intervertebral disc with prolapse at the level of L3–L4. With stand for hanging.

Product data:

Size: 85 cm
Weight: approx. 2.9 kg