Human Models

Knee joint, extended
This 3D-printed specimen shows the ligaments of the knee joint with the leg extended; it is the same specimen as the knee joint MP1800 in the flexed position. The tibial collateral ligament and the fibular collateral ligament are intact.

Natural cast of a human knee joint. With stumps of the upper and lower leg. The insertion tendon of the rectus femoris muscle, kneecap with patellar tendon, collateral ligaments, menisci and cruciate ligaments are made of elastic plastic. The most important movements in the knee joint, such as flexion and extension as well as external and internal rotation, can be demonstrated. With removable stand.

Knee model with endoprosthesis
This life-size knee model made of transparent plastic clearly demonstrates the position and function of a knee endoprosthesis. The replica prosthesis can be removed from the model and reinserted, allowing the procedure to be explained very clearly to the patient during consultation and pre-operative preparation. The endoprosthesis is made of metal and is approximately the same size and weight as a real prosthesis. Thanks to the transparent bone design, the position and function of the prosthesis can be seen very clearly.

Colon Model with Diseases
Reduced-size model of a human large intestine showing the ileum, caecum, ascending colon, transverse colon, descending colon, sigmoid colon and rectum. The following diseases are shown: appendicitis, Crohn’s disease, irritable bowel syndrome, ulcerative colitis, pseudomembranous colitis, diverticulosis, diverticulitis, carcinoma and colorectal polyps. On a stand, detachable. With educational card.

This model shows the wrist and the carpal tunnel. The following ligaments are shown, among others:
Flexor retinaculum, pisometacarpal ligament, pisohamate ligament, tendon of the flexor carpi radialis muscle, palmar ulnocarpal ligament, palmar radiocarpal ligament, dorsal radiocarpal ligament, dorsal radioulnar ligament, dorsal ulnocarpal ligament, dorsal carpometacarpal ligaments, dorsal metacarpal ligaments.

Dimensions: 20.0 x 20.0 x 5.0 cm (L x H x W)
Weight: approx. 150 g

Lower limb – deep dissection of the left pelvis and thigh
This 3D-printed specimen shows a deep dissection of the left pelvis and thigh to demonstrate the course of the femoral artery and the sciatic nerve from their proximal origin to the midshaft of the femur. Cranially, the pelvis was sectioned along the midsagittal plane and the pelvic viscera were removed. In the pelvis, the coccygeus muscle runs between the sacrum and the ischial spine; the obturator artery and the obturator nerve enter the obturator foramen above the obturator membrane.

LSAT Ver.2 Lung Auscultation Trainer
This unique trainer provides more efficient and effective lung auscultation training.

The patient’s physical status can be controlled via a touchscreen tablet. The simulator includes 36 patient cases with case information such as X-ray, CT and bronchoscopy images.

The torso has 7 anterior and 8 posterior auscultation sites that can be used with standard stethoscopes. This allows more than one student to auscultate at the same time. All sounds are classified according to American Thoracic Society guidelines. An integrated LED light indicates the inspiration and expiration phase and is synchronised with the sounds (can be switched off). Background heart sounds are available and can be volume-adjusted.

The system is supplied fully configured on a trolley (can be removed for use on a table). An automatic test routine checks all components when the device is switched on, ensuring malfunctions are ruled out.

L1 to L5 and the sacrum are flexibly mounted. With spinal cord and emerging spinal nerves. All movements in the lumbar spine region can be demonstrated.
With removable stand.

Product data:

Weight: 0.7 kg

Lung Cancer Comparison Model
These lung models give the viewer a shockingly clear impression of the damage caused by smoking.
The pink lung is healthy and free from any abnormalities.
In contrast, the smoker’s lung is black, has a grey-white cancerous ulcer and is covered with spongy blisters caused by pulmonary emphysema.
With this model, you will make a lasting impression!

Product details:

Healthy size: 13 x 22 x 10 cm
Diseased size: 14 x 22 x 13 cm

This skull model is a cast of a real human child skull specimen and shows all anatomical structures in the highest level of detail. It was developed for students of anatomy, medicine, surgery, ENT, ophthalmology and dentistry. The skull is cut into complex sections and assembled with metal and magnetic connections.

The calvaria is opened and removable. Bony impressions of the superior sagittal sinus, transverse sinus and sigmoid sinus, as well as the meningeal vessels, are painted. The skull base is sagittally sectioned in such a way that, on one side, the cut passes through one cribriform plate and a further cut in the same plane passes through the other cribriform plate of the ethmoid bone, leaving the crista galli and the perpendicular plate as well as the entire nasal septum intact. The structures of the anterior, middle and posterior cranial fossae are easily accessible. The nasal cavity, the nasal concha, the septum, as well as the bony pharyngeal space and nasopharynx can be viewed directly. The nasal septum can be removed from the surrounding bony structures. The removable temporal bone shows a complete external auditory canal.

The maxilla and mandible show the structures of the dentition, the roots, the bony margin of the alveolar process, as well as dental nerves and vessels. The maxillary sinus can be opened by removing a flap. The teeth, including the permanent teeth still embedded in the bone, can be accessed by removing a bony flap.

Estimated age: 3 years

This skull model is a cast of a real human skull specimen and displays all anatomical structures with the highest level of detail. It was developed for students of anatomy, medicine, surgery, ENT, ophthalmology and dentistry. The skull is complexly sectioned and assembled with metal and magnetic connections.

The calvaria is opened and removable, while leaving the temporal bones and their sutures untouched. Bony impressions of the superior sagittal sinus, transverse sinus and sigmoid sinus, as well as the meningeal vessels, are painted. The skull base is sagittally sectioned in such a way that the cut on one side passes through one cribriform plate and a further cut in the same plane passes through the other cribriform plate of the ethmoid bone, leaving the crista galli and the perpendicular plate as well as the entire nasal septum intact. The structures of the anterior, middle and posterior cranial fossae are easily accessible. The nasal cavity, nasal conchae, septum, as well as the bony pharyngeal and nasopharyngeal space can be seen directly. The nasal septum can be removed from the surrounding bony structures. The frontal sinuses are prepared as a whole on one side; on the other side they are opened, making them fully accessible. The relationship of this sinus to the nasal cavity is clearly visible, which is particularly valuable for ENT specialists.

On one side of the skull, the temporal bone has been left in situ. The other temporal bone is removable from the skull. Part of the mastoid process and the squamous part of the temporal bone, together with the mastoid antrum, can be removed and provide an unobstructed view of the inner ear. All three semicircular canals are visible, together with the course of the facial nerve, which runs posteriorly and then inferiorly and ultimately emerges through the stylomastoid foramen. The removable temporal bone shows a complete external auditory canal. An almost vertical cut through the mastoid process and then further inwards along the petrotympanic fissure divides the temporal bone, and the position of the tympanic membrane can be seen. The carotid canal and the cochlea are opened, showing the internal auditory canal, and the course of the facial nerve can be identified. The oval window, the semicircular canals and the opening of the tympanic cavity can be seen.

The maxilla and mandible show the structures of the dentition, the roots, the bony margin of the alveolar process, as well as dental nerves and vessels. The maxillary sinus can be opened by removing a flap. The teeth of the right mandibular flap are halved and show the internal structures of the teeth.

EZ make-up blood with high viscosity in liquid form is ideal for realistic accident simulation.
Suitable for use on simulation patients and wound moulages.

The make-up blood is supplied in a high-quality plastic bottle with a dosing cap for quick and easy filling.

Product advantages:
• Made in Germany
• Washes out of clothing
• Skin-friendly
• Food grade quality
• Without preservatives
• Recycled PET bottle with dosing cap

Micro-Preemie Preterm Baby Simulator
According to a WHO study, 1 in 10 babies is born prematurely. Birth with an extremely low birth weight (= 1,000 g) is still a medical emergency requiring special techniques and equipment. This training model simulates a preterm baby born at 25 weeks’ gestation, the smallest realistically proportioned preterm infant available. Fully articulated and allows practice of a wide range of common treatment procedures. Exceptional realism is achieved through positioning and the absence of muscle tone.

- Invaluable for simulation training in nursing and in caring for preterm infants who require intensive care at the limits of survival.
- Ideal for neonatal intensive care units, emergency services, aeromedical teams, simulation centres, nursing schools, hospitals and family education.
- Easy to use, requires no special equipment, compact and mobile.
- Suitable for achieving learning objectives in a neonatal resuscitation course.

Features and functions:
- Airway, breathing and ventilation
- Chest drainage (non-functional)
- Cleaning and nappy changing
- Delivery
- Nasogastric tube
- IV access (non-functional)
- Monitoring (non-functional)
- Neural tube defect (myelomeningocele)
- Observation and measurement
- Scenarios
- Simulated breathing
- Skin and wound care
- Soft, lifelike skin
- Stoma care
- Suctioning
- Umbilical stump with optional omphalocele
- Various monitors, sensors, electrodes etc. can be connected to the model (non-functional)
- Ventilation

Includes the Micro-Preemie Simulator, a nappy, a hat (colour may vary), umbilical stump, omphalocele, neural tube defect, double-sided chest block, single-sided chest block, airway, 3 cc syringe, 25-gauge butterfly needle, lubricant, blood powder, hand pump with tubing.

Product details:

Age: 25th week of gestation
Length: 30 cm head to toe, hand-to-hand
Width: 22 cm
Head circumference: 23 cm
Head depth: 8 cm
Shoulder-to-shoulder width: 10 cm
Abdominal circumference: 22 cm
Toe-to-toe width: 15 cm
Torso depth: 5 cm
Weight: 0.91 kg

Reduced-size representation of a human skeleton at approx. half life-size. Skull, arms and legs are removable. The skull can be disassembled into three parts. Easily removable from the stand.

Product data:

Height without stand: approx. 80 cm
Weight: 1.8 kg

Scaled-down replica of a human spine at approx. half life-size. All bones are shown individually. The fully articulated model shows vertebral bodies, a segment of the skull base, pelvis, intervertebral discs, the vertebral artery, and emerging spinal nerves. The ideal model for use on the go, at courses, seminars or with patients. Handy and sturdy, it fits into any bag. The model can be easily removed from the attractively designed stand.

Size: 38 cm, Weight: 0.2 kg

This reduced-size model of a human spine, approx. half life-size, shows all bones as well as the intervertebral discs, spinal nerves and the vertebral artery. On a removable hanging stand.

Product details:

Size: approx. 38 cm
Weight: 0.3 kg

Representation of the human torso at approx. ½ natural size. Ideal for use as a desk model or for studying basic anatomy.
The model consists of the following parts: main body, two head halves (one with removable brain), two lung halves, heart (can be dismantled into two parts), stomach, liver, intestinal package with removable appendix cover, female reproductive organs (two-part), male reproductive organs (two-part).
The model is supplied on a base plate with instructions.

Product data:

Size: 19 x 14 x 43 cm
Weight: 2.6 kg

This hip joint model at approx. ½ natural size shows the structures of the joint in detail as well as the main ligaments. The internal joint structures can be explained using the cross-sectional model mounted on the base.

Size: 12 x 10 x 18 cm, weight: 0.18 kg