Ventilation and Intubation

SUPER VEGA BATTERY - plastic housing - 36 l/min.

With built-in rechargeable batteries. It can be powered by a 12 V supply for rechargeable batteries and, thanks to an electronic system, also by 230 V when recharging the batteries.

Operating time: approx. 60 min
Charging time: 120–150 minutes.
Maximum suction: -0.80 bar
Flow rate: 36 l/min
The unbreakable standard 1,000 ml bottle (2,000 ml optional) is autoclavable at 120°C and features a safety float shut-off valve to prevent overflow.

Standard accessories
• 1-litre bottle – autoclavable at 120°C
• Silicone tubing set
• Suction catheter
• Bacterial protection filter
• Cable for charging the batteries from the mains power supply
• Cable for charging the batteries from the car
• Multilingual user manual (GB, IT, FR, DE, ES)

Product data:

• Operating voltage: 100–240 V – 50/60 Hz
• Dimensions: 350 x 210 x 180 mm
• Weight: 4.9 kg
• Maximum suction: -0.80 bar
• Flow rate: 36 l/min
• Standards: IEC 601-1 – Class II Type B
• Made in Italy

Colour: Black
Made from polyester

Pressure regulator with 2 outlets (shown here with ZGA-DIN coupling and 9/16" outlet).
1st outlet: Flow control (0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 9 / 12 / 15 / 25 l/min). 9/16" hose barb outlet. Outlet pressure 2.5 bar.

2nd outlet: ZGA-DIN coupling or 3/8" connection, e.g. for ventilators. Outlet pressure 4.5 bar. Cylinder contents pressure gauge in low-profile design with rubber protective ring.


The pressure regulators distributed by us have had a lifetime of 10 years since 2016 and are MAINTENANCE-FREE within this period!! This means that no further maintenance costs are incurred during this time. According to the manufacturer, neither STK nor MTK is required.

The following applies to all our pressure regulators: the pressure gauge is well protected, low-profile, compact and easy to read, and can be rotated 360°; optimal readability under all conditions. The 360° swivel flow outlet 9/16" enables flexible connection in all directions. Self-centring flow adjustment handwheel with 2 display windows on all pressure regulators with variable flow; uninterrupted flow even between the individual switching stages.

1 piece

Pressure reducer as a distribution valve up to 120 l/min. Special pressure reducer as a distribution valve in the ambulance. Approved up to 300 bar, max. flow 120 l/min.

Outlet pressure:
4.5 bar, inlet G ¾” to DIN 477, outlet connection 3/8” male thread. Cylinder contents pressure gauge in flat design with rubber protective ring. Available in various versions with variable connection studs (long or short version).



The pressure reducers distributed by us have, since 2016, a lifetime of 10 years and are MAINTENANCE-FREE during this period!! This means that no further maintenance costs are incurred during this time. According to the manufacturer, neither STK nor MTK is required.

The following applies to all our pressure reducers: the pressure gauge is well protected, flat, compact, easy to read and rotatable through 360°; optimum readability under all conditions. The 360° swivel flow outlet 9/16” allows flexible connection in any direction. Self-centring flow adjustment handwheel with 2 display windows on all pressure reducers with variable flow; uninterrupted flow even between the individual switching stages.

1 piece

Pressure reducer as a distribution manifold up to 120 l/min. Special pressure reducer as a distribution manifold in ambulances. Approved up to 300 bar, max. flow rate 120 l/min, outlet pressure 4.5 bar, inlet G ¾” to DIN 477, outlet connection ZGA DIN coupling. Cylinder contents pressure gauge in a low-profile design with rubber protective ring. Available in various versions with variable connection bolts (long or short version).

The pressure reducers distributed by us have had a lifetime of 10 years since 2016 and are MAINTENANCE-FREE within this period!! This means that no further maintenance costs are incurred during this time. According to the manufacturer, neither STK nor MTK is required.

The following applies to all our pressure reducers: the pressure gauge is well protected, low-profile, compact and easy to read, and can be rotated 360°; optimal readability under all conditions. The 360° swivel flow outlet 9/16” enables flexible connection in all directions. Self-centring flow adjustment handwheel with 2 display windows on all pressure reducers with variable flow; uninterrupted flow also between the individual switching stages.

1 piece

Compact pressure regulator with adjustable flow settings (0 / 0.25 / 0.5 / 0.75 / 1 / 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 l/min) and self-centring handwheel with 2 flow windows. Inlet G ¾” to DIN 477, outlet 9/16”. Cylinder contents pressure gauge in a flat, compact design; cylinder contents pressure gauge rotatable 360°. 360° swivelling flow outlet enables flexible use in all applications. Constant flow, even if the handwheel is held in an intermediate position. Available in various versions with variable connection pin (long or short version).

The pressure regulators distributed by us have had a lifetime of 10 years since 2016 and are MAINTENANCE-FREE within this period!! This means there are no additional maintenance costs during this time. According to the manufacturer, neither STK nor MTK is required.

For all our pressure regulators: the pressure gauge is well protected, flat, compact and easy to read and rotatable 360°; optimum readability under all conditions. The 360° swivelling 9/16” flow outlet enables flexible connection in all directions. Self-centring flow adjustment handwheel with 2 display windows on all pressure regulators with variable flow; uninterrupted flow even between the individual switching stages.

- Length approx. 12 cm
- Ø approx. 4 cm
- Weight approx. 650 g
- MRI-compatible

1 piece

Carrying bag, universal mains cable and car charging cable. This device has adjustable power levels from 1 to 5, which corresponds approximately to the output in litres, and a weight of 2.2 kg.

Trolley, universal mains cable and car charging cable.
This device has adjustable output levels triggered from 1 to 6, which roughly correspond to the output in litres, and in continuous flow output levels from 0.5 to 2 litres, as well as a weight of 4.6 kg.

Carrying bag, universal mains cable and car charging cable. This device has adjustable power levels from 1 to 5, which correspond approximately to the output in litres, and a weight of 2.5 kg.

Colour: White

The wall bracket is a sturdy hot-dip galvanised sheet steel construction with chain safety catch and drilled holes for wall mounting.

Single-use emergency resuscitation aid in accordance with DIN 13 154 with a high-quality FFP3-class filter.

Sealed in foil.

The PMB pocket mask effectively protects the first aider during life-saving rescue breaths. It prevents direct contact between patient and rescuer, protects against vomit and provides optimal ventilation control.
With disposable valve, replacement filter and disposable vinyl gloves

Safe
- Double protection thanks to the disposable valve in the mouthpiece and the hydrophobic bacterial filter
- Additional protection against infections thanks to disposable vinyl gloves
- Transparent PVC body for better monitoring of the patient

Flexible
- Oxygen port for administering oxygen to breathing and non-breathing patients
- Can also be used with resuscitator bags or ventilators

High level of user comfort
- Easy-to-deploy mask with a soft, conforming mask cushion
- Adjustable rubber strap for an optimal fit
- Easy and safe transport thanks to the robust hard-shell case

The AERObag resuscitation bag from HUM is supplied with two masks (sizes 0 + 1) for infants/newborns (up to 10 kg), an O2 tube and an integrated reservoir bag.

Product data:

Tidal volume: 150 ml
Material: SEBS
Latex-free: yes